MF Digital DIRECTOR CD/DVD Combo Series (Rev: 08/01/02) - Manual (Page 67)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 66
Adding Tracks
•
As depicted below, drag one or more WAV / MP3 files onto the text "The
end" as it appears in the top left corner of the bottom pane. Multiple files
may be selected by pressing and holding down the SHIFT or CTRL key
while clicking on the tracks. SHIFT allows you to select a range of
contiguous tracks, while CTRL allows you to randomly pick multiple
tracks. As additional tracks are added, drag and drop them in at the desired
insertion point.
Selecting CD Capacity
At the bottom left of the lower pane is a radio button which is used to select
the capacity of the CD-R or CD-RW discs that are loaded into the
DIRECTOR: 74 minute/650MB or 80 minute/700MB (DVD 3.95GB and
DVD 4.7GB are not used).
Click the radio button to switch between 74 min. and 80 min., depending on
the capacity of the discs loaded into the DIRECTOR.