Microtel DialStat (With Fault Indicators) - Manual (Page 30)

MICROTEL DialStat
TM
28
APPENDIX C: FCC Requirements
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the side of the DialStat metal case is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
information must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted by
the ACTA. A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is useful to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company. The REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
If the DialStat causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. But if advance
notice isn’t practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with the DialStat, please contact MICROTEL service at 1-225-303-
0436 for information on obtaining service or repairs. If the equipment is causing harm to
the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
Refer to Chapter 4 - Maintenance/Troubleshooting, for user-serviceable procedures.
Connection to party line service is subject to state tariffs. (Contact your state public
utility commission or corporation commission for information.)