Microtel DialStat (With Fault Indicators) - Manual (Page 31)

MICROTEL DialStat
TM
29
APPENDIX D: DialStat
TM
Command Summary
*00 Report system status
*01 **01~ Voice system name (10 seconds)
*02 **02nn Answer Delay (00 – 99 rings)
*03 **03nn Access Code (00 = Disabled)
*04 **04HH Snooze Delay (HH = 00 – 99 Hours)
*05 Recites vocabulary&firmware version
*06 **060/1/2
Control local output
*c1 **c1~ Fault c voice name
*c2 **c2SS Fault c delay (00 – 99 Seconds)
*c3 **c31/0 Fault c alarm configuration
*c4 **c41/0 Fault c Return-To-Normal config
*6n **6np** Telephone n (n = 1 to 8)
Phone Number Escape Codes
*0 Tone dial (default)
*1 Pulse dial
*2 2 second pause
*3 Dial numeric pager, wait for answer
*4 Auto acknowledge this call if answered
*5 Dial ‘*’
*6 Dial ‘#’
......................................................
~ speech (# while recording - mic cut off)
nn two digit numeric value (00-99)
SS time value in Seconds format
c fault input channel number 1-5 (5=pf)
p 0-30 digit phone number, with escape codes
MICROTEL
Technical Support &
Service
225/303-0436