Canon 430 - Manual (Page 141)

139
T
rou
bleshootin
g
White dots appear
on the image Light from the flash
has reflected off
dust particles or
insects in the air.
(This is especially
noticeable when
shooting at wide
angle) • This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
Flash does not fire Flash is set to off • Set the flash to on.
Image not showing
on TV monitor Incorrect video
system setting • Set the video system to the
appropriate setting, NTSC or PAL,
for your TV (p. 50).
Shooting in stitch
assist • The output will not appear on a
TV in stitch assist. Cancel the
stitch assist.
Zoom does not work Zoom lever pressed
during movie
recording
• Adjust the zoom before shooting
a movie.
Reading images
from CF card is slow CF card was
formatted in another
device • Use a CF card formatted in your
camera.
See Formatting CF Cards (p.
107).
Recording images to
CF card takes a long
time
Problem Cause Solution