Canon 430 - Manual (Page 88)

86
Setting the Auto Rotate Function
Your camera is equipped with an Intelligent Orientation sensor that detects
the orientation of an image shot with the camera held vertically and
automatically rotates it to the correct viewing orientation in the display. You
can set this function on/off.
• This function may not operate correctly when the camera is pointed
straight up or down. Check that the arrow is pointing in the right
direction and if it is not, then set the Auto Rotate function to [Off].
• Even if the Auto Rotate function is set to [On], the orientation of
images downloaded to a computer will depend upon the software
used to download the images.
• When the camera is held vertically to shoot, the Intelligent
Orientation sensor judges the upper end to be “up” and the lower
end to be “down.” It then regulates the optional white balance,
exposure and focus for vertical photography. This function operates
regardless of the On/Off status of the Auto Rotate function.
• When changing the camera’s orientation between the horizontal and
vertical positions, you may hear noise coming from the orientation
detection mechanism. This is not a malfunction.
1 In the (Set up) menu, select .
See Selecting Menus and Settings (p. 43).
2 Use the or button to select [On]
and press the MENU button.
• The display will return to the Shooting
screen.
• When the Auto Rotate function is set to
[On] and the LCD monitor is set to the
detailed display mode, the
icon
(normal), icon (right end is down) or
icon (left end is down) will appear in
the upper right of the display.