Canon 430 - Manual (Page 66)

64
To change the continuous shooting speed
• The interval between shots may lengthen slightly when the camera’s
built-in memory fills.
• If the flash is firing, the interval between shots will lengthen to
accommodate the flash’s charging requirements.
Using the Self-timer
With this function, images are shot 10 or 2 seconds after the shutter button is
pressed. This is useful when you want to take a memorable photo with everyone
including yourself in the picture. The self-timer can be used in any shooting
mode.
To cancel the self-timer
Press the / button to display .
1 In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2 Use the or button to select
or and press the MENU button.
The display will return to the Shooting
screen.
1 Press the / button to display
or .
• When the shutter button is pressed fully,
the self-timer will activate and the self-
timer lamp will blink.
• When the self-timer is set to ( ),
the shutter activates 10 (2) seconds after
the shutter button is pressed fully.