Muse Research Receptor TRIO/QU4TTRO manual v1.0 - Manual (Page 18)

18
Selecting Individual Audio Input Effect Presets
Now let's make your own custom preset consisting of different effects on different audio inputs.
Say, for example we wanted to play acoustic guitar and have some chorus on the guitar sound, and
sing with a some processing on our vocal microphone.
1. First, press the "PLAY" button. Now, since we want to start from a balnk preset, first turn the
bottom knob counter-clockwise until you see "TAG: (None)" and <New Empty Preset> as the preset
name and then press the bottom encoder button to clear out all the previous presets and settings.
2. Next, we press the PLAY button and then select EFFECT channel. Since nothing has been loaded,
we need to open up a channel which is done by pressing the bottom encoder.
3. RECEPTOR defaults to Input 1 on the AudioBox on the first channel you open up (or Input A on
the rear of the AudioBox is disconnected), Input 2 on AudioBox for the next, and then proceeds
from there for new channels. To change the input assignment for a particular channel, simply press
the SETUP button and you can re-assign the inputs to whatever input you desire. Selecting the
same input across multiple channels will process the input in parallel, creating dramatic effects.