Muse Research Receptor TRIO/QU4TTRO manual v1.0 - Manual (Page 41)

41
System Specifications
Dimensions:
RECEPTOR: 19" wide (standard rack space, (48cm)), 3.0" high (not including feet, two rack spaces (7.6cm)), 10.5" deep
(26.7cm), not including knobs. RECEPTOR is designed for table-top and rackmount use.
AUDIOBOX: 19" wide (standard rack space, (48cm)), 1.5" high (not including feet, two rack spaces (3.8cm)), 10.5" deep
(26.7cm), not including knobs. RECEPTOR is designed for table-top and rackmount use.
Weight: RECEPTOR weighs approximately 15 lbs (6.8kg). The PreSonus AudioBox 1818 interface weighs approximately 4 lbs,
11 ounces (2.1kg)
Power Requirements: RECEPTOR and AudioBox 1818: 100-240VAC input, 50/60Hz, auto-power ranging. Can be used
anywhere in the world with the proper power connector. If the power feeding this device is subject to brownouts or
interruption, we recommend connecting it to an uninterruptible power supply that can supply 250 watts of power.
Operational Guidelines: RECEPTOR is designed for the rigors of the touring evironment, however we recommend the following
operational conditions to ensure maximum reliability and longevity: The system can operate from 35 degrees F to 95 degress
F. Operation at extreme high temperatures is not recommended for extended periods of time; provide supplemental cooling
if doing so. Unit contains a rotating hard drive that is vulnerable to mechanical failure if subjected sudden acceleration. For
applications where unit will be subject to movement while powered on, we highly recommend installing the optional Solid State
Hard Drive which has no moving parts.
Transportation temperature range: -20 to 140 degrees F, assuming unit is not subjected to condensation.
Built -in Inputs and Outputs:
Front panel:
One 1/4" TRS (Tip / Ring / Sleeve) headphone jack, disabled with line outputs connected on rear os with PreSonus
AudioBox interface connected and selected as the primary audio I/O device.
Rear Panel:
Two 1/4" line level outputs, low impedance.
Two 1/4" line level inputs, high impedance.
One full-size 5-pin DIN MIDI INPUT jack.
One 1/4" TRS Footswitch Input jack. Grounding the Tip or Sleeve will invoke assigned function. Default function
assignment is Tip=Patch Increment, Ring= Patch Decrement)
Six USB 2.0 Jacks for conection to a mouse, keyboard, or device-compliant MIDI USB devices.
One Gigabit Ethernet Jack for connection to a Computer or network (networking cables not supplied).
One 15-pin VGA monitor connector for connecting a computer monitor.
One HDMI monitor connector for connecting to an HDMI television monitor.
Bottom Panel:
One USB "dongle" port, accessible by removing four screws on the bottom of the unit.