Muse Research Receptor TRIO/QU4TTRO manual v1.0 - Manual (Page 42)

42
System Specifications
External PreSonus AudioBox interface Inputs and Outputs:
Front panel:
One 1/4" TRS (Tip / Ring / Sleeve) headphone jack, (Fed from Audio Outputs 7 and 8
Eight combination XLR / 1/4" combi jacks for Mic, Instrument and Line inputs. First two inputs are especially
designed for use with very high imedance inputs like Guitars or basses. Other inputs accept microphone or line
levell inputs. All inputs have adjustable front panel gain.
Rear Panel:
Eight 1/4"balanced, low impedance line level outputs, labeled 1 through 8.
Two 1/4"balanced, low imedpance, line level outputs, labeled Main Out L and R, fed from outputs 1 and 2.
One full-size 5-pin DIN MIDI INPUT and OUTPUT jack.
One full-size 5-pin DIN MIDI INPUT jack.
One full-size 5-pin DIN MIDI OUTPUT jack.
One ADAT digital audio optical TOSLINK INPUT connector.
One ADAT digital audio optical TOSLINK OUTPUT connector.
One S/PDIF digital audio INPUT on RCA type coaxia connector (RED)
One S/PDIF digital audio OUTPUT on RCA type coaxia connector (WHITE)
One Word Clock digital clock output on BNC connector. 4.5Vpp, 75 ohm termination.
One USB Type B connector for connection to the RECEPTOR.
One coaxial DC power input connector for +18V, 2.6A, Center Pin Positive DC power supply adapter.
One Gigabit Ethernet Jack for connection to a Computer or network (networking cables not supplied).
One 15-pin VGA monitor connector for connecting a computer monitor.
One HDMI monitor connector for connecting to an HDMI television monitor.
For more information on the PreSons AudioBox inteface, please consult the manual included with the unit or visit the
Presonus.com website for more information.
Special Front Panel Key Combinations & Shortcuts
Pressing the power button once will cause the unit to start up
Pressing the power button twice will cause the unit to shut down completely. IMPORTANT: ALWAYS SHUT THE
RECEPTOR DOWN BY PRESSING THE POWER BUTTON TWICE TO ENSURE NORMAL OPERATION.
Pressing the power button three times will reset the unit and reload the current sounds or effects.
Holding down 'PLAY' at startup will rescan Banks and Patches, rebuilds the plugin list, and start the mixer in a default
setting with no sounds or effects loaded.
Holding down PLAY + MIX creates an all notes message MIDI panic in the event that your keyboard or MIDI device
did not send a Note Off message.