Muse Research Receptor TRIO/QU4TTRO manual v1.0 - Manual (Page 28)

28
Audio Input Channel Controls
1. Channel Solo Switch: Solos this channel and mutes all others when pressed / lit.
2. Effect Graphical Editor: Click on the icon of the effect and the GUI of the effect itself will
appear. You can then edit the effect's individual interface using your mouse.
3. Preset Selector: Opens up the preset selection window for that particular plug-in.
4. Assignable Parameters: These four knobs are "assignable parameters" which are the first four
default parameters or the first four that you assign using the MIDI Learn function.
Tip: You can move any of the knobs in the RECEPTOR GUI by clicking and dragging the knob in a
circular fashion, or positioning the mouse tip on the knob and moving your mouse scroll wheel.
5. MIX Effect Sends: These two knobs control how much signal is sent from this channel to the
MIX bus effects assuming an effect is loaded and that effect is configured in SEND mode.
6. Input Selector: Lets you select one of the physical inputs on RECEPTOR, or on the PreSonus
1818 interface (if connected and selected). You can select inputs individually (mono) or in pairs
(stereo).
7. Input Level Indicator: Shows the current level of the input signal coming into the channel.
Adjust the input channel gain control (or source feeding the interface) so that the red clipping
indicator does not illuminate, or the audio signal will be clipped and distorted.
8. CPU Indicator: This meter shows the CPU load in real time from this particular effect.
9. Channel Output Pan Control: Adjusts the output between the left and right channels.
10. Channel Output Volume Control: Adjusts the relative level of this channel's output.
11. Output dB readout: Indicates the current volume control setting in dB.
12. Channel Shrink / Expand button: Pressing this button "shrinks" the channel strip to show
only the most vital information for an individual channel
Tip: Double clicking any where on a channel strip will cause ALL channels to shrink or expand.
13. Channel Output Level Meters: Shows channel output level for current output volume
setting. Clipping will illuminate the top segments and can be reset by clicking on the top segment
indicators.
14. Channel Output Button: Opens the output assignment menu. This button appears ONLY if
the PreSonus AudioBox interface is attached, powered on, and selected in SETUP. It allows you to
send this channel's audio output directly out one of the channels in the PreSonus audio interface.