Muse Research Receptor V2.0.1 Software Update Manual User Manual
Page 42
42
Restoring Your Main Drive From Your Backup, continued...
Once you determine that you want to restore the entire drive, or simply restore what has changed since
you last backed up, you will be asked whether that is really what you want to do:
NOTE: This is particularly critical to make sure you really want to Restore your Main drive
from your Backuo. Any and all data that is on your drive will be erased if you do a Full System
Restore, and everything that has changed since the last time you backed up will be erased
if you choose do a "Normal" restore. Make sure you really want to do a Restore before
proceeding!
If you press the encoder to proceed, you wil be given one last chance to cancel the procedure:
If you are sure you want to proceed, then turn the bottom knob until it says OK and press the encoder to
begin the Restore procedure. During that time you will be advised similarly to the Backup procedure:
and...
Once the Restore procedure is complete, you will see the completion screen:
If you turn the knob clockwise you will see the exit screen allowing you to shutdown your unit: