Muse Research Musebox manual v1.0 - Manual (Page 17)

17
Getting Familiar: Unpacking and Setup
First, you are going to want to unpack your MuseBox and remove all the packing material. In your
MuseBox package, you'll find the following:
1. Your MuseBox (of course).
2. The power supply and power cable.
3. A CD containing this manual and some other useful utility software.
4. The printed quick-start guide.
MuseBox is really easy to set up and get working:
1. Remove all the packing material from your MuseBox, and place it on a stable indoor surface with
adequate ventilation where it won’t get wet.
2. Plug the power supply connector into the back of the unit where it says "Power Supply."
3. Plug the power cord into an AC power wall socket and the other end into the power supply.
Note: MuseBox's power supply is auto-ranging and can be used anywhere in the world. All you
need is the correct AC cable to connect to the power supply to your wall outlet.
4. Plug your MIDI keyboard into the back, or your microphone into the bottom front panel input, or
your guitar into the top front panel input.
5. Power it up by pressing the power button on the top right hand corner of the front panel.
6. Get ready to make some music!