Muse Research Musebox manual v1.0 - Manual (Page 28)

28
4. Select the "gTR Clean 6505+" preset and press the encoder to load the preset.
5. Play your guitar and adjust the gAIN control for Channel A so that the green and yellow LEDs
light on a regular basis, but the Red LED does not light even when playing hard.
Feel free to browse the other guitar Effect presets; especially in some of the other TAgs since there
are many different sounds available to you. Enjoy the 32-bit floating point processing and 24-bit
audio output that makes your guitar sound amazing!
MuseBox as a Vocal Processor/Effects box
1. Start by plugging the XLR-type microphone cable from your microphone into Input B of MuseBox
as shown in the "Getting Started: Typical Connections" section describing "MuseBox as a Vocal
Processor." If your microphone requires +48V Phantom power, press the button labeled "48V" next
to the Input B label.
2. Power up MuseBox if its not already on. If it isn't already lit, press the PLAY button.
3. Turn the BOTTOM knob and select "TAG: FX: Vocal". Select the preset "VOC Pop Vocal" using
the top knob and push the knob to load. Sing in to your microphone and enjoy the high quality
processing of your vocals. Feel free to browse the other Vocal processing presets and enjoy how
MuseBox enhances the sound of your own voice.
Effects that are typically only found in high-end professional recording studios are now yours to use
any time you like!