Muse Research Musebox manual v1.0 - Manual (Page 37)

37
Getting Started: Using the MuseBox Graphical User Interface
The MuseBox graphical User Interface (gUI), lets you see what is happening inside your MuseBox,
as well as letting you use a keyboard and mouse to make edit the factory presets or make new
ones. To view the MuseBox gUI, simply connect a standard computer VgA monitor to the VgA
output on the rear of the unit, and a USB mouse and USB QWERTY keyboard to the USB Port. You
can also see this interface by networking to your Mac or PC. For more information on how this is
done, please visit the website. The Graphical User Interface will appear on your screen like this:
Exploring the GUI: The PRESET Menu Tab
In the top left-hand corner, you'll see the PRESET Tab. Here you can create a new empty preset, or
save an existing preset that you've edited, or use SAVE AS to save your changes as a new preset.
You can also rename, or delete an existing preset using the menu items in this tab.
Exploring the GUI: The TAG Tab
Next to the Preset Tab menu is the TAg Tab, which lets you Add a new TAg, Remove an existing
Tag, or Rename a Tag as something different Note that to Add a new Tag to your preset, simply
select an existing Tag from the drop down menu, or type the name of a new Tag and click OK.
Exploring the GUI: Tags/Presets
On the left hand side of the screen you'll see a column with the heading Tags/Presets. These are
just like the Tags and Presets you see when you have the PLAY button pressed on the front panel of
your MuseBox, except here you can see ALL the Tags and Presets at once!
Each TAg has a small Arrow that you can click to reveal all the Presets associated with that
particular Tag. To load a preset in a Tag, simply click on the preset and the preset will load.