MUTEC MC-1.2 - Manual (Page 14)

14
USB Driver Installation & Windows Settings
Windows Settings
After installation of the MUTEC USB Audio Class 2.0 Driver for Windows is successfully completed, you can connect your MC-
1.2 to one of your computer’s USB ports by using the USB cable included in the scope of delivery. Switch on your MC-1.2 and it
should be automatically recognoized by your computer‘s operating system.
Attention
The direct interconnection between your MC-1.2 and your computer is best with regards to signal perfermance. We recommend
to not use USB hubs within the signal chain.
You now have to set your MC-1.2 as standard sound device. Click on the »Start Menu« button and select »Control Panel«.
In Control Panel select »Hardware and Sound«.
Click on »Sound«.