MUTEC MC-1.2 - Manual (Page 7)

7
Introduction
Peripheral MUTEC Products
Optical cables in different lenghts from 0.5 m to 20 m for S/P-DIF and ADAT TM transfers.
MW-02/19, Mounting plate to install two MC products side by side into one unit of a 19” rack.
MW-03/19, Set of two rack mounting angles to install one MC product on the rear side of a 19” rack.
MW-05/19, Set of two rack mounting angles to install one MC product frontally into one unit of a 19” rack.
For all peripheral products please have a look on our website:
www.mutec-net.com
MS Windows Driver Support
When connecting your MC-1.2 to a Windows computer, you have to use our special USB Audio Class 2.0 Driver for Windows
available on our website. Install the driver first before connecting the MC-1.2 to your computer!
Please go to:
www.mutec-net.com > Products > USB Interfaces > MC-1.2 > Downloads
Or for direct access type in the following URL into your browser:
http://www.mutec-net.com/product_mc-12.php?lng=en#download
After the successful download double click on the driver symbol and follow the instructions during installation procedure.
Attention
No driver installation is necessary when using the MC-1.2 with Apple Macintosh computers.
Product Registration for Warranty and Support
We ask you to be so kind to register your MUTEC product through our website immediately after buying. This ensures full
warranty services over a period of two years after purchasing the product. More-over, for all registered products we offer to our
customers technical support. We also will inform you about product updates and new products which may of interest for you
(on voluntary base, of course).
Please regsiter your product at:
www.mutec-net.com > Service > Product Registration
Or for direct access type in the following URL into your browser:
http://www.mutec-net.com/produktregistrierung.php?lng=en