MUTEC MC-1.2 - Manual (Page 15)

15
Operation
In the »Playback« tab select »MC-1.2« from the list of
available devices and click »Properties«. Click on the »Advanced« tab and select under »Default
Format« the entry »24 Bit, 19200 Hz (Studio Quality)«.
Under »Exclusive Mode« check that the two tik boxes are
selected. Click »OK« to store your settings.
General System Operation
Operating the MC-1.2 is very easy! The device is fully operated using the two keys on the front panel.
»MENU« Key
Pressing the »MENU« key toggles between different basic function menus, usually between the vertical LED rows.
»SELECT« Key
Pressing the »SELECT« key activates individual functions within one menu by toggling between the LEDs of one vertical LED
row.
First press on »MENU« or »SELECT« key enables the last selected function within the last selected menu. The appropriate LED
starts fl ashing. Every press on »SELECT« key will select a new function within the menu and the LED fl ashes accordingly. After
a period of approx. 4 seconds the LED of the selected function stops fl ashing and the function is activated.
The »STATUS« and »CLOCK
IN « menus are not accessible for adjustments. For further descriptions see next page under Status
Information.
Attention
In the special case of the MC-1.2, its operation with help of the »MENU« and »SELECT« keys on the front panel is limited to
the selection of the digital audio input only. Thus, the keys have got the same function. It makes no difference for selecting the
digital audio input which one of both keys is used.menu, the LED row marked with »A« (A = Audio) shows the sampling rate
embedded in the incoming digital audio signal.