NORAC UC4.5-BC-JD8A - Manual (Page 21)

19
4. Mount the brackets (B09) as shown in Figure 16, Figure 17 and Figure 18. Install two
(2) cable ties per bracket.
Figure 16: Bottom Bracket Mounting Figure 17: Top Bracket Mounting
Figure 18: Bracket Mounting (Looking from the Rear)
5. Install the base end of the position sensor with the cable facing the center of the sprayer in
the lowest hole of the bracket possible without making contact with the boom frame. Use
the mounting hardware as shown in Figure 19.
Figure 19: Mounting Hardware
Collar Bolt Nut Nut