NORAC UC4+BC+JD11 - Manual (Page 21)

18
5. If desired, the roll sensor may be mounted inverted as shown in Figure 18, so long as the
connector still exits towards the right-hand boom. Inverted mounting may be used to
minimize the distance (C) between the roll sensors.
Figure 18: Inverted Roll Sensor Mounting
6.3
Temperature Probe Mounting
1. Fasten the temperature probe (E03) to the UC4 valve block using the included 3/8x1/2”
bolt as illustrated in Figure 19.
Figure 19: Temperature Probe Mounting