NORAC UC5-BC-JD08A - Manual (Page 21)

18
4. Mount the brackets (B09) as shown in Figure 14, Figure 15 and Figure 16. Install two
(2) cable ties per bracket.
Figure 14: Bottom Bracket Mounting Figure 15: Top Bracket Mounting
Figure 16: Bracket Mounting (Looking from the Rear)
5. Install the base end of the position sensor with the cable facing the center of the sprayer in
the lowest hole of the bracket possible without making contact with the boom frame. Use
the mounting hardware as shown in Figure 17.
Figure 17: Mounting Hardware
Collar Bolt Nut Nut