Canon H12157 - Manual (Page 186)

7-6 Receiving Faxes Chapter 7
What Happens When Fax/Tel Mode is Selected
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when Fax/Tel Mode is selected.
Telephone Fax Fax
Sending document
manually
Sending document
automatically
LASER CLASS 2060P answers without ringing
LASER CLASS 2060P listens for FAX TONE
(For 8 sec.)
FAX TONE
detected
FAX TONE is not detected
Document received
automatically.
LASER CLASS 2060P starts ringing
Pick up the
handset to talk.
If you don’t pick up the handset
(within 15 sec.)
F/T SW ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
DISCONNECT
RECEIVE
(Factory default setting)
(FAX TONE is detected
and the LASER CLASS
2060P switches to
receive mode.)
LASER CLASS
2060P disconnects
the call.
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the LASER CLASS 2060P
switches to receive mode automatically and starts
receiving the document. If no document comes in,
it disconnects after approximately 35 seconds.
F/T RING TIME
(Factory default
setting = 15 sec.)
RING START TIME
(Factory default
setting = 8 sec.)
Telephone charges
begin for caller.
Type of call
07.Chapter 7.fm Page 6 Tuesday, May 29, 2001 4:46 PM