Tx settings – Canon H12157 User Manual
Page 312
15-8
The Menu System
Chapter 15
TX SETTINGS
1.ECM TX
Turn ECM (error correction mode) transmission off and on. This switch does
not affect the button setups for One-Touch or Coded Speed Dialing.
ON
All transmissions are conducted with ECM if the other party’s fax supports
ECM.
OFF
ECM is turned off.
2.MID PAUSE SET
Set the length of the pause you insert into a dialing sequence.
2 SEC (1 to 15)
3.AUTO REDIAL
Set whether to perform automatic redial when the other line is busy or no
answer.
ON
Customize the redial operation.
REDIAL TIMES
Set the number of retries.
2 times (1 to 10)*
REDIAL INTERVAL Set the period of time between redialings.
2 minutes (2 to 99)
OFF
After the first attempt at dialing fails, redialing is not attempted.
4.TIME OUT
Set the interval between dialing (entering phone numbers) when sending to
more than one destination.
ON
Fax scans the document in 5 or 10 seconds after you enter the phone
number.
OFF
Press Start/Copy to scan the document. Otherwise, the unit will return to
standby mode after 60 seconds.
(Default settings are shown in bold type)
* Even if this fax unit is set to redial several times, it will redial only once if there is no tone or
there is a ring back tone during the first attempt.