Creda 41202 - Manual (Page 7)

USE INSTRUCTIONS
7
FITTING/REPLACING THE BATTERY
The battery is not covered by the guarantee. Use an alkaline AA battery. The battery
holder is located in the plinth panel below the oven door. Open the oven door fully.
Unscrew the knurled fixing screw anti - clockwise and remove. Withdraw the battery
holder just enough to get access to the battery. Fit the new battery with the end
marked “+” on the same side of the battery holder as the red lead. Replace the battery
holder by placing it into the hole in the plinth and sliding to the left. Refit the screw.