Crisp Solutions 616 - Manual (Page 18)

UCommand-616 Universal Remote Control User’s Manual
10 Power supply
Inserting batteries
To insert batteries, refer to the following illustration and instructions:
1. Remove
battery
cover.
2. Insert
batteries.
Ensure
that you
insert
the batteries
according to
the marking
inside the
battery case.
Connector for Battery
charger
Figure 2-1: Inserting the batteries
1. Locate the battery-bay cover at the back of the UCommand-
616.
2. Put your thumb in the battery cover slot and pull to remove
the cover.
3. Insert the batteries into the bay in the direction indicated in
the battery compartment.
4. Replace the battery bay cover. You will hear it click into
place.