Crisp Solutions 616 - Manual (Page 59)

Chapter 4—Programming and Customizing the UCommand-616
Making LCD adjustments 51
Period : Touch the < > arrows to adjust the length of time the backlight
stays on after it is first activated during use of the remote (each touch
of the screen during normal use restarts the backlight timer).
When you have finished adjusting the backlight, press ENTER to save
your changes and return to the Other menu.
Calibrating the LCD
Rarely, the LCD buttons lose positioning calibration. When this hap-
pens, pressing an LCD button results in the adjacent button activating
instead. To correct this, you can calibrate the LCD panel.
From the Other menu, scroll to Calibrate and press ENTER; the Cali-
brate screen displays. Touch the edge of the screen next to the pen
icon. The pen icon moves to the next edge. Continue pressing the edge
of the screen next to the pen icon until all four edges of the screen
have been processed.