Crisp Solutions 616 - Manual (Page 39)

Chapter 4—Programming and Customizing the UCommand-616
Changing the LCD layout 31
Clearing all devices
The Clear All function allows you to erase the commands for all de-
vices programmed into the UCommand-616. Follow these
instructions:
1. In the program menu, scroll to Clear All and press ENTER.
2. You are prompted to press the ENTER button to delete the
settings for all devices, or press the menu button to cancel
the changes and return to the previous screen.
Changing the LCD layout
The Adjust menu allows you to resize, relabel, move and delete but-
tons on the Main menu and on the Device menus.
In the Setup menu, scroll to Adjust and press ENTER. The following
screen displays:
Adjust
Device
Main Menu
Figure 4-9: The Adjust menu
Select Main Menu and press ENTER for the following screen: