Carrier Access Adit 3500 - Manual (Page 19)

Adit 3500 - Release 1.6 19
Quick Start Guide
Interface Connectors
DS1/E1 Connection Ports
Each DS1/E1 connection port is equipped with a standard RJ-48C (female) on the
Adit 3500 unit. Note: E1 will be available in a future release.
The pinouts are as follows:
DS1/E1 RJ-48C
The pinouts are as follows:
The LEDs are as follows (left LED only):
Pin Name Description
1 Receive Ring Receive from DS1 network
2 Receive Tip Receive from DS1 network
3 N/C Not connected
4 Transmit Ring To DS1 network
5 Transmit Tip To DS1 network
6 -8 N/C Not connected
State Description
Off Off line
Green Normal
Red Loss of Signal (LOS)
Yellow Bipolar Violation (BPV)
Flashing Green Loopback active
Flashing Yellow Yellow Alarm (Remote Alarm Indication)
Flashing Red (Slow) Loss of Frame (LOF) or Alarm Indication Signal (AIS)
Flashing Red (Fast) Self-test Failure
1 8