Carrier Access Adit 3500 - Manual (Page 21)

Adit 3500 - Release 1.6 21
Quick Start Guide
Reset Button
RS-232 Craft Port (Female DB-9)
The RS-232 craft port connector (female) is for connection to an external PC or Hayes-compatible
modem for local or remote configuration, management, and performance monitoring using the Adit
3500 Command Line Interface (CLI).
The RS-232 craft port connects via a female DB-9 connector on the Adit
3500.
The pinouts are as follows:
RJ-11 Connector
There are four RJ-11 (female) connectors for the FXS ports.
The pinouts are as follows:
Reset Button
The system can be reset by pressing the reset button located on the front panel.
Pin Direction Description
1 Outbound Carrier Detect
2 Outbound Receive Data
3 Inbound Transmit Data
4 Inbound Data Terminal Ready
5 N/A Signal Ground
6 Outbound Data Set Ready
7 Inbound Request to Send
8 Outbound Clear to Send
9 N/C Not connected
Pin Name Description
1 - 2 N/C Not connected
3 R Ring
4 T Tip
5 - 6 N/C Not connected
1 5
6 9
1 6