Cortelco FOUR LINE CORDLESS ANALOG ADAPTER 2742 - Manual (Page 10)

7
3. CONFIGURATION MODIFICATION
The default settings after initial power up are given in the table below.
SETTING AVAILABLE OPTIONS
Station Number: 01 Station 02 to 16
CO1: Ringer On On/Off
CO2: Normal, Ringer On Normal w/ Ringer On
Normal w/ Ringer Off
Unconnected
CO3: Normal, Ringer On Normal w/ Ringer On
Normal w/ Ringer Off
Unconnected
CO4: Normal, Ringer On Normal w/ Ringer On
Normal w/ Ringer Off
Unconnected
Flash Time for Cordless Telephone: 600ms 300ms/600ms
3.1. Change Default Setting
Each station must be assigned a different station number.
a.
Go off hook from the cordless telephone and get internal dial tone.
b. Dial 6XXYYYYZ6 (see following sections)
XX = The station number to assign, ie; 01 to 16
YYYY = The CO Type setting for each CO Line
0 = Unconnected
1 = Normal w/ Ringer On
2 = Normal w/ Ringer Off
Z = The Flash Timer setting. The two possible setting are
3 = 300ms
6 = 600ms.
The standard setting is 600ms.
If the string is invalid, a no action beep will be heard.
c. Dial tone will be heard again.
c. Hang up to complete the process.
For example, to set station 01 with all four lines with normal ringer on and 600 ms flash time. Dial
“601111166”.