Cortelco FOUR LINE CORDLESS ANALOG ADAPTER 2742 - Manual (Page 12)

9
4. TELEPHONE OPERATION
4.1. Making and Answering Intercom Calls
To make an intercom call from a telephone connected to the Cordless Adapter, go off hook and dial the
desired station number (01 through 16). When receiving an intercom call, your cordless telephone will
ring but no line LED will light. If you have Caller ID on your telephone, the calling station
information will be displayed.
4.2. Making and Answering CO Line Calls
To make a call on a CO line, dial 9, for the first open line or dial a code for an individual line. The
code for Line 1 is 81. The code for Line 2 is 82. The code for Line 3 is 83, and the code for Line 4 is
84. Any ringing line will be answered by going off hook.
4.3. Hold
4.3.1. Hard Hold
Many cordless telephones have a built in hold feature. This type of hold does not put the line on
system hold and prevents any one else picking up the line unless privacy has been removed from
system.
4.3.2. Placing a Call on System Hold
To place an outside call on System Hold, press the Flash button. To take the call off hold, press the
Flash button. While a caller is on hold, you can not go on hook without receiving a ring back. While a
call is on hold, it can be taken off hold by any 4-line telephone connected to that line simply by
accessing the line.
Note: An intercom call cannot be placed on hold.
While having a conversation on a CO line, if a call comes in on another line, you can place the first call
on hold via flash, and answer the call by dialing the trunk code for the flashing line.
4.4. Transfer
CO line calls may be transferred to other 4 – line units.
4.4.1. Attended Transfer
a. Press Flash to place the CO Line on System Hold.
b. Dial the target Station number. After the station answers, announce your call and hang up.
4.4.2. Blind Transfer
a. Place CO Line on System Hold with Flash.
b. Dial the target Station number preceded by a “*”. After the called station starts ringing,
disconnect.
Example: To transfer to station 03, press Flash, dial “*03”, and disconnect.