Crestron electronic TPS-17G-QM/-L-IMC - Manual (Page 10)

Power Interface Module Crestron TPS-17G-QM/-L-IMC
Setup
Network Wiring
When wiring the Cresnet network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (
www.crestron.com/calculators ).
• For networks with 20 or more devices, use a Cresnet Hub/Repeater
(CNXHUB) to maintain signal quality.
For more details, refer to “Check Network Wiring” which starts on page
9.
6 • Power Interface Module: TPS-17-QM/-L-IMC Operations Guide – DOC. 6783A