Crestron electronic TPS-17G-QM/-L-IMC - Manual (Page 11)

Crestron TPS-17G-QM/-L-IMC Power Interface Module
Hardware Hookup
Make the necessary connections as called out in the illustration that
follows this paragraph. Refer to “Network Wiring” on page 6 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
When making connections to the TPS-17G-QM/-L-IMC, use Crestron
power supplies for Crestron equipment.
Hardware Connections for the TPS-17G-QM/-L-IMC
PWR IN
24 VDC 3.5 A:
FROM EXTERNAL
POWER SUPPLY*
NET IN:
FROM CRESTRON
CONTROL SYSTEM
NET OUT:
TO NET PORT ON
TPS-17G-QM/-L
* The PW-2435RU (included) is the only power supply recommended for powering
this unit.
Operations Guide – DOC. 6783A Power Interface Module: TPS-17G-QM/-L-IMC • 7