Crestron electronic TPS-17G-QM/-L-IMC - Manual (Page 8)

Power Interface Module Crestron TPS-17G-QM/-L-IMC
Connectors, Controls & Indicators
# CONNECTORS*,
CONTROLS &
INDICATORS
DESCRIPTION
1 PWR IN
24 VDC 3.5A
(1) 2.1 mm barrel DC power
jack;
Connects to 24 Volt DC output of
PW-2435RU power supply
(included)
2 NET IN Four-position terminal block
connector;
Cresnet port with floating 24 pin;
Connects to Cresnet control
network
Y: Data
Z: Data
G: Ground
3 NET OUT Four-position terminal block
connector for data and power;
Cresnet pass-through port with
dedicated 24V power;
Connects to NET port on the
touchpanel using Cresnet control
cable
24: Power (24 Volts DC)
Y: Data
Z: Data
G: Ground
* Two interface connectors for NET ports are provided with the unit.
4 • Power Interface Module: TPS-17-QM/-L-IMC Operations Guide – DOC. 6783A