PRG Mbox Designer Manual 3.8 - Manual (Page 180)

172 MBOX ® MEDIA SERVER USER MANUAL
GENERAL OPERATION
About Mbox Remote
The Mbox Remote application is used for remote monitoring and management of the Mbox application.
The Remote application is included with the Mbox software and can also be used on any Mac®
computer (running Snow
Leopard® OSX 10.6.7 or greater ) to monitor/manage from a remote location.
Mbox Daemon
It is important to note that Mbox Daemon software is required on all servers to enable remote feedback
to both Mbox Remote and to CITP/MSEX-enabled devices. When Mbox launches, it will automatically
launch the last version of Mbox Daemon used on that computer.
To set the network port that Mbox and Daemon will use to communicate with external monitoring
devices (like Remote or CITP-enabled consoles and visualizers), use the CITP pop-up on the Mbox
Setup tab as shown below:
Training Video: Mbox Media Server Training Video Chapter 7: Daemon Application
Set Network
Synchronization
Port
Set Network
CITP Port