PRG Mbox Designer Manual 3.8 - Manual (Page 240)

232 MBOX ® MEDIA SERVER USER MANUAL
*
These elements require additional input files in order to obtain the desired result. Users will need to provide their own additional
files.
** The modifier channels for the Damping effects apply damping in 1/30 sec. increments. Therefore, a value of 30 will add 1 sec-
ond to any change of that parameter. The damping is divided equally between the start and end of the movement curve. Effect
parameters can be adjusted during a move to affect only one side of the curve.
Notes for EFFECTS Table:
1
These effects require that the second effect channel on the corresponding layer be set to 255. At that point, Mod 2A controls X-
position and Mod 2B controls Y-position. The default value for both additional controls is 127.
2 This effect requires that the second effect channel on the corresponding layer be set to 255. At that point, Mod 2A controls X-
position and Mod 2B controls Y-position. The default value for both additional controls is 127. Also, the shape of the oval can
be manually preset – contact a PRG representative for more info.
3
Modes for Effect 110:
0 Luma, 1 Luma Invert, 2 Red, 3 Red Inv, 4 Green, 5 Green Inv, 6 Blue, 7 Blue Inv, 8 Alpha, 9 Alpha Inv
4
Effects 201-217 are not available for use on the Master fixture.
215 Texture Flip
inverts drawing axes (X,Y,Z) when
applying a texture to an object
0 - 31 = flip X
32 - 63 = no flip
64 - 95 = flip X, Y
96 - 127 = flip Y
128 - 159 = flip X,
Z
160 - 191 = flip Z
192 - 223 = flip X,
Y, Z
224 - 255 = flip Y,
Z
n/a
217 Spin
controls spin speed and direction
about X/Y/Z axes
Control 1 - Z Axis :
0 = stop + return to 0°
1 - 126 = fast to slow forwards
127 = stop
128 - 255 = slow to fast backwards
Control 2 - X Axis :
0 = stop + return to 0°
1 - 126 = fast to slow forwards
127 = stop
128 - 255 = slow to fast backwards
Control 3 - Y Axis :
0 = stop + return to 0°
1 - 126 = fast to slow forwards
127 = stop
128 - 255 = slow to fast backwards
Control 4 - N/A
Effects (Continued)
(Refer to notes at end of Effects table.)
ID Effect Description Control 1 Control 2