Keyless enter-n-go, To unlock from the driver or passenger side, To lock the vehicle’s doors – Ram Trucks 2013 Chassis Cab - User Guide User Manual

Page 13: Getting started

Advertising
background image

KEYLESS ENTER-N-GO™

• The Keyless Enter-N-Go™ system is an enhancement to the vehicle's Key Fob.

This feature allows you to lock and unlock the vehicle's door(s) without having to
press the Key Fob lock or unlock buttons, as well as starting and stopping the
vehicle with the press of a button.

To Unlock From The Driver or Passenger Side:
• With a valid Keyless Enter-N-Go™ Key

Fob located outside the vehicle and
within 5 ft (1.5m) of the driver or
passenger side door handle, grab ei-
ther front door handle to unlock the
door automatically.

To Lock The Vehicle’s Doors
• With a valid Keyless Enter-N-Go™ Key Fob transmitter within 5 ft (1.5 m) of the driver

or passenger front door handles, press the door handle LOCK button to lock all doors.

• DO NOT grab the door handle, when pressing the door handle lock button. This

could unlock the door(s).

NOTE:
• After pressing the door handle LOCK button, you must wait two seconds before

you can lock or unlock the doors, using either Passive Entry door handle. This is
done to allow you to check if the vehicle is locked by pulling the door handle,
without the vehicle reacting and unlocking.

• The Passive Entry system will not operate if the RKE transmitter battery is dead.

The vehicle doors can also be locked by using the RKE transmitter lock button or the
lock button located on the vehicles interior door panel.

GETTING STARTED

11

Advertising