Ram Trucks 2013 Chassis Cab - User Guide - Manual (Page 40)

Included Trial Period for New Vehicles
• Your new vehicle may come with an included trial period for use of the Uconnect
®
Access Services starting at the date of vehicle purchase*. To activate the trial, you
must first register with Uconnect
® Access. Once registered, Uconnect ® Access
customers can purchase additional Services and Apps over the lifetime of their
vehicle ownership.
Features and Packages
• After the trial period, you can subscribe to continue your service by visiting the
Uconnect ® Store located within the Mopar Owner Connect website
(MoparOwnerConnect.com). If you need assistance, U.S. residents can call
Uconnect
® Care at 855-792-4241.
• For the latest information on packages and pricing information for U.S. residents
only, visit www.DriveUconnect.com.
Uconnect® Access Registration
NOTE:
To unlock the full potential of Uconnect
® Access in your vehicle, you first need to
register with Uconnect ® Access.
1. From the parked vehicle with the radio touch screen powered on, select the
“Apps” soft-key located near the bottom right-hand corner of the radio touch
screen.
NOTE:
Should you require assistance anytime during the registration process, simply press
the ASSIST button located on the rear view mirror to be connected with a Uconnect
®
Care agent.
2. Touch Register on the reminder screen or select the “Uconnect Registration”
soft-key which appears in the “Favorites Tab” on the Apps list.
3. The Uconnect ® Access Registration App will open and display step-by-step
instructions to start your registration.
4. Enter your E-mail address into the radio touch screen.
5. This message will display on the touch screen indicating your mail submission
was accepted. In a few minutes, you will receive an mail which will allow you to
register your vehicle for Uconnect
® Access. You should open this mail and begin
your Uconnect ® Access registration within 24 hours.
6. A final message will display on the touch screen allowing you to check on the
status of your mail submission. To exit the registration, press the X in the upper
right corner.
ELECTRONICS
38