Steam suction, Using the machine as a vacuum cleaner, If the red water indicator light comes on – Reliable EV1 User Manual
Page 18
16
9
10
STEAM SUCTION
t 1SFTTCVUUPO mH POUIFIBOEMF
(with the symbol of the fan) to start
suction. To interrupt suction push the
same button.
USING THE MACHINE AS A
VACUUM CLEANER
t $IFDLUIBUUIFHSFFOQPXFSMJHIUJTMJU
t 'JMMXJUIXBUFSVQUPUIFMFWFMJOEJDBUFE
inside the tank (white mark).
t 1SFTTCVUUPO mH POUIFIBOEMF
to activate suction, fit the accessory
you wish and start cleaning. To interrupt
WBDVVNJOH
QSFTTBHBJOCVUUPO mH
t 1SFTTCVUUPO mH XJUIUIFTZNCPM
+/-) to change the vacuum intensity.
t *GZPVLFFQCVUUPOQSFTTFEGPSBGFX
seconds, you can modify the intensity
from maximum to minimum value. If you
release button 10, the intensity set will be
automatically saved by the machine.
t 'PSTNBMMWBSJBUJPOTJOTVDUJPOQPXFS
press button 10 on and off intermittently.
t 0ODFUIFWBDVVNDMFBOFSJTUVSOFEPGG
next time you use the machine is used
the suction intensity will return to the
maximum value.
IF THE RED WATER INDICATOR
LIGHT COMES ON
When the indicator light 5 turns on and an
intermittent beep sounds, the tank is running
out of water. Therefore the steam flow will be
interrupted.
If the light turns on, proceed as follows:
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 3FNPWFUIFQMVHBOEmMMJUDPNQMFUFMZ
with tap water.
t 3FDPOOFDUUIFNBDIJOFUPUIFQPXFS
supply and continue cleaning.
fig. 12
USE OF THE MACHINE
fig. 13
REAR VIEW OF THE MACHINE
6
5