Using the accessories, If the dust/dirt collecting tank is full, Universal brush – Reliable EV1 User Manual
Page 19
17
E
fig. 14
IF THE DUST/DIRT COLLECTING
TANK IS FULL
When the maximum level in the dirty water
tank is reached, suction stops and the motor
makes a different noise.
In this case, proceed as follows:
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 3FNPWFUIFQMVHPGUIFnFYJCMFIPTF
from the machine.
t 3FNPWFUIFEVTUDPMMFDUJOHUBOLGSPN
its slot (fig. 7).
t 1VMMPVUIPPL& mH BOESBJTFUIF
tank cover.
t &NQUZUIFUBOL
t 'JMMXJUIXBUFSVQUPUIFMFWFMJOEJDBUFE
inside the tank (white mark).
t $MPTFUIFDPWFSBOESFQPTJUJPOUIFUBOL
on the machine making sure it is firmly
in place (otherwise, there will be a poor
suction).
t 3FDPOOFDUUIFQMVHPGUIFnFYJCMFIPTF
to the machine and re-start your work.
Do not remove the dirty water tank before
the vacuum motor has stopped completely.
USING THE ACCESSORIES
UNIVERSAL BRUSH
Suitable for: cleaning any kind of surface.
To be mounted: on the extension wands.
Use: the cleaning brush can release steam
to clean floors and at the same time extract
the dirty liquid; it must be used moving it
alternately backwards and forwards on the
surface to be cleaned.
Use on dirty floors: After turning the machine
on and after the green light 2 comes on (fig.9):
t 0QFSBUFUIFTUFBNMFWFS mH PO
the handle, then press button 9 (fig. 12)
to activate suction.
t $MFBOUIFTVSGBDFVTJOHUIFCSVTI
t 'PSJEFBMESZJOH
JOUFSSVQUUIFTUFBNnPX
by releasing lever 14 but maintaining
suction activated.
USE OF THE MACHINE
fig. 15
14
CAUTION
ATTENTION
IMPORTANT