Reliable EV1 User Manual
Page 26
24
CLEANING THE AIR FILTER OF THE
DUST COLLECTING TANK
Every time the air intake filter has to be
cleaned, proceed as follows:
Disconnect the machine from the
power supply.
Remove the male plug of the flexible
hose from the machine.
Remove the dust collecting tank from
its seat on the machine (fig. 27) and
lift up the protection cover.
Remove the filtering element Z and
wash it thoroughly with clean water.
Refit the filtering element being very
careful not to damage it
Close the cover and reposition the
tank on the machine.
If the filtering element is damaged, replace
it immediately.
CAUTION
ATTENTION
IMPORTANT
fig. 27
REPLACING THE ACTIVATED
CARBON FILTER
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 0QFOUIFHSJMMFPOUIFMFGUTJEFCZQVTIJOH
the relevant fixing.
t 3FQMBDFmMUFS5BOESFmUUIFHSJMMF
REPLACING THE MOTOR AIR FILTER
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 3FNPWFUIFCPUUPNHSJMMF6BGUFS
loosening the relevant fixing screws.
t 3FQMBDFmMUFS7BOESFmUUIFHSJMMF.
fig. 28
MAINTENANCE
fig. 26
U
V
Z