Canon PC1308 - Manual (Page 101)

101
You can automatically playback images and movies recorded to a memory
card. Each image displays for approximately 3 seconds.
Select [Slide Show].
● Press the n button and select the 1
tab, then select [Slide Show] and press
the
m button.
Select [Start].
● Press the qr buttons or turn the  dial
to select [Start], then press the m button.
X A few seconds after [Loading image…]
displays, the slideshow will start.
● You can pause/restart a slideshow by
pressing the
m button again.
● Press the n button to stop the
slideshow.
Changing Settings
You can change the time that images are displayed, and set the slide show
to repeat.
Select [Set up].
● Follow Step 2 above, select [Set up] and
press the
m button.
Make the setting.
● Press the op buttons and select an item,
then press the qr buttons, or turn the Â
dial and make the setting.
● Pressing the n button will return you
to the slide show screen.
. Viewing Slideshows
• If you press the qr buttons or turn the  dial during playback the
image will switch, if you press and hold down the qr buttons you can
fast-forward through images.
• Power saving function does not work during slideshows (p. 51).
COP
Y