Canon PC1308 - Manual (Page 105)

105
Move the zoom lever toward
k.
● The enlarged display will appear, and if
you continue to hold the zoom lever the
image will magnify up to a maximum
factor of approximately 10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Move the zoom lever toward g to reduce
the magnification or return to Single
Image Playback.
● If you turn the  dial, you can switch
images while they are still enlarged.
You can select from three transition effects when switching between movies
or images in single image playback.
Select [Transition].
● Press the
n button and select the 1
tab, then select [Transition] and use the
qr buttons to select the desired
transition.
X Press the n button to make the
setting.
k Magnifying Images
Approximate Location
of Displayed Area
+ Changing Image Transitions
Immediately switches between images without transition effect.
The next images will gradually appear.
Switches between images by sliding them left or right when the qr buttons
are pressed.
COP
Y