Canon PC1308 - Manual (Page 136)

136
If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 46).
Using the Slow Synchro
You can use this to shoot people and main subjects at the appropriate
exposure, and the shutter speed is lowered so that both the subject and the
background appear at the proper brightness.
● Select [Flash Settings], then press the
m
button.
● Press the op buttons or turn the  dial to
select [Slow Synchro], then press the qr
buttons to select [On].
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions using the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
button.
● Press the op buttons or turn the  dial to
select [Red-Eye Lamp], then press the qr
buttons to select [Off].
Before attempting to shoot using a function explained in this chapter in
modes other than
G mode, check if the function is available in those
modes (pp. 150 – 153).
Changing Shooting Functions
• Attach a tripod to the camera, as the shutter speed is slow. You are
recommended to shoot with the [IS Mode] set to [Off] (p. 139).
• Even if the flash fires, ensure that the subject does not move until the
shutter sound ends.
COP
Y