Canon PC1308 - Manual (Page 93)

Changing the Image Quality
93
Image Quality Table
Estimated Shooting Time
In X you can set the exposure, or change it in 1/3 steps within a range of ±2.
Focus.
Set the exposure.
● Press the o button to lock the exposure,
the exposure shift bar appears.
● Press the
o button again to release the lock.
Change the exposure.
● While watching the screen, press the qr
buttons or turn the
 dial to adjust the
brightness.
Shoot.
Image Quality
(Recording Pixels/Frame Rate)
Content
640 x 480 pixels, 30 frames/sec. This setting will produce standard movies.
320 x 240 pixels, 30 frames/sec.
Since the number of the recording pixels is
smaller, the image quality will be lower than with
, but you can record three times the length.
Image Quality
(Frame Rate)
Shooting Time
32 MB (Supplied) 2 GB 8 GB
22 sec. 23 min. 49 sec. 1 hr. 35 min. 11 sec.
1 min. 12 sec. 1 hr. 13 min. 10 sec. 4 hrs. 52 min. 24 sec.
• Based on Canon’s testing standards.
• Max. clip length is approx. 1 hour.
Recording also stops when the file size reaches 4 GB.
• Depending on the memory card, recording may stop even if the max. clip length has not
been reached. Use of SD Speed Class 4 or higher memory cards is recommended.
AE Lock/Exposure Shift
COP
Y