Vermont Casting GPFMP - Manual (Page 9)

9
Vermont Castings Gas Patio Fire
Optional GPF Cover Assembly
1. Lay all parts on the floor.
2. Attach all three frame stands to the top and bottom
rings using bolts and nuts provided. (Fig. 16)
Top Ring
Bottom Ring
Frame
Stands
FP1164
Fig. 16 Attach frame stands to top and bottom rings.
3. Place vinyl cover on the floor with the opening facing
up. Insert the frame assembly into the cover. (Fig. 17)
Vinyl Cover
FP1163
Fig. 18 Use velcro straps to hold vinyl cover to frame.
4. Use the three inside velcro straps to hold the vinyl
cover to the frame. (Fig. 18)
5. Turn the cover with the frame over and it is ready to
use.
Before using the vinyl cover turn the GPF flame to
OFF and wait unit the unit is completely cool.
When using the optional screen mesh on the GPF,
the metal support assembly needs to be removed
from inside the vinyl cover.
Frame
Assembly
Vinyl
Cover
FP1162
Fig. 17 Insert frame assembly into vinyl cover.
CAUTION: Do not leave burner on with the
cover on!