Scientech S310 Vector User Manual

Page 42

Advertising
background image

42

5. IEEE488 Specific Commands:

These commands may be used only from the IEEE488.2 interface. They are all members of the collection of
the so-called "common Commands" described in the IEEE488.2 standard.

*CLS
Clears the Standard Event Status Register and forces the device into Operation Complete Command Idle state.

*ESR?
Returns a decimal number which is the value of the Standard Event Status Register. Reading the register clears
it.

*ESE_<dec num>
Sets the bits of the Standard Event Status Enable Register to the binary representation of the decimal integer
supplied.

*ESE?
Returns a decimal number representing the contents of the Standard Event Status Enable Register.

*SRE_<dec num>
Sets the bits of the Standard Request Enable Register to the binary representation of the decimal integer
supplied.

*SRE?
Returns a decimal number which represents the contents of the Service Request Enable Register.

*OPC
Sets the "Operation Complete" event bit in the Standard Event Status Enable Register when pending device
operations have been completed.

*STB?
Returns a decimal number which is the value of the IEEE488.1 status byte and the Master Summary Status
message.

F

ACTORY

R

ECALIBRATION

:

Scientech recommends that a complete calibration be performed annually to verify system accuracy. Please
contact our Product Service Department at (800)525-0522 or (303)444-1361 or Fax (303)444-9229 or email
[email protected] to arrange for a NIST traceable, factory calibration.

L

IMITED

W

ARRANTY

:

All Scientech Laser Power and Energy Measurement Systems are warranted against defects in materials and
workmanship for two (2) years from date of delivery. During the warranty period, Scientech will repair, or at its
option replace at no charge, components that prove to be defective. The equipment must be returned, shipping
prepaid, to Scientech's product service facility. This limited warranty does not apply if the equipment is
damaged by accident or misuse or as a result of service or modification by other than a Scientech service
facility. The foregoing warranty is in lieu of all other warranties expressed or implied including but not limited
to any implied warranty of merchantability, fitness, or adequacy for any special incidental or consequential
damages whether in contract, tort, or otherwise.

Advertising