Shellab SWPK - Manual (Page 10)

10 | P a g e
SWPK INSTALLATION
7) M OUNT THE C OVER B OX
1. Locate the slot on the top of the Cover Box.
2. Locate the mounting tab on the top of the SWPK Assembly.
3. Mate the slot on the Box to the tab on the Assembly, so that the Cover Box hangs off the
top of the SWPK Assembly.
Figure 9: Cover Box Mounted
8) S ECURE THE C OVER B OX
1. Insert the two (2) included Quick Release Pins into their mounting holes on the left and
right sides, at the bottom of the Cover Box.
2. The Pins should pass through both the holes in the Cover Box and the corresponding
mounting holes in the SWPK Assembly.
Figure 10: Left Side QR Pin