Shellab SWPK - Manual (Page 5)

5 | P a g e
SWPK INSTALLATION
I NSTALLATION P ROCEDURE
Complete the steps below (described in detail on the following pages) to install the SWPK:
1. Install the Water Filters
2. Mount the SWPK Assembly on the Unit
3. Connect the Water Input Line to the Filter
4. Connect the Water Output Line to the Filter
5. Secure the Water Output Line
6. Threading the Water Input and Output Lines
7. Mount the Protective Box Cover
8. Secure the Protective Box Cover
9. Install a Push-To-Connect Fitting
10. Connect Output Line to Unit
11. Connect to Water Source
12. Connect the Condensation Drainage Line