Shellab SWPK - Manual (Page 7)

7 | P a g e
SWPK INSTALLATION
2) M
OUNTING THE
SWPK
The SWPK unit can be mounted on your laboratory or workspace wall, or on a Sheldon humidified
chamber or incubator. Four (4) self-tapping sheet metal screws are included with each SWPK for
mounting on Sheldon units. Verify that there are no critical components, electrical wires, or fluid
containment vessels beneath the drilling site. Always depower and unplug the unit prior to drilling.
If mounting on a wall or other alternative surface, please contact your facilities department for the
appropriate fasteners.
Figure 4: SWPK Assembly Mounted
(SCO26H / 2428H Incubator)