SIG SAUER SIG50 - Manual (Page 43)

when it counts ™
www.sigsauer.com 43
8.6 bolt maintenanence
1. remove the bolt from the receiver.
2. Hold the bolt in your left hand with the bolt handle towards you, bolt face to the left, cocking piece housing to the right,
and with the cocking piece facing up.
3. Holding the bolt firmly in your left hand, grasp the cocking piece housing with your right hand, and give the cocking
piece housing a 1/8 turn away from you (clockwise). This unlocks the firing pin assembly from the bolt.
4. While still holding the bolt in your left hand, pull the firing pin assembly out to the right. Then lay the bolt body aside.
5. remove all grease, dirt, powder residue, and solvents from the firing pin assembly and inside bolt body.